Table of Contents
Advertisement
VERSION 07/2009
OPERATING MANUAL
6.4
CHANGING AND SAVING PROGRAMS
6.4.1
PROGRAMS NO. 1-4
Programs 1-4 can be selected and saved directly using program buttons 5-8. Once the
program required has been called up, the individual coating parameters can be called up
and changed using the corresponding selection buttons. The individual parameters are
described in chapters 6.5.1-6.5.8. When a parameter is changed, the LED on the left of the
program button fl ashes to indicate that a parameter value has been changed.
The process for saving parameters is described below.
To reuse the originally set values, press the program button briefly. The modifi ed
●
values are not taken over.
To save the modified values, press the appropriate program button and hold for
●
approx. 2 seconds until the LED beside the button flashes quickly. The modified values
are then saved.
ORDER NUMBER DOC 2305835
5
6
7
8
P_01125
Prima
Sprint.
43
Advertisement
Table of Contents
