Table of Contents
Advertisement
VERSION 07/2009
OPERATING MANUAL
6.9
PERFORMING A COLOR CHANGE (3L/60L CONTAINER)
6.9.1
CLEANING PROCESS WHEN USING A SINGLE POWDER CONTAINER
Hint:
For a color change, all components of the powder feed system must be thoroughly
cleaned.
EP G
P_01137
To adapt the programs to the new applications proceed as described in chapter 6.3
"Coating programs".
ORDER NUMBER DOC 2305835
17
SPR INT
Procedure:
1. Release the trigger on the spray gun.
The high-voltage and the powder feed are
●
deactivated.
2. Remove the injector from the holder to stop powder
feed.
3. Guide the gun into the spray booth and start the
purge function by pressing the "rinse" button 17.
The injector and hoses are purged.
4. Switch off the control unit.
5. Open the powder container and clean all powder
feeding parts of the unit, such as the spray gun,
the injector, the powder feed hose and the suction
system.
6. Clean the powder container and pay special
attention to the fl uid base.
Hint:
Proper fl uidization is not possible with a damaged
and/or clogged fl uid base.
Prima
Sprint.
59
Advertisement
Table of Contents
