Checking The Pem-C4-Ergo Corona Manual Gun; Replacing The Spray Gun - WAGNER Prima Sprint Airfluid Translation Of The Original Operating Manual

Prima Sprint.
VERSION 07/2009 ORDER NUMBER DOC 2305835
OPERATING MANUAL
7.2

CHECKING THE PEM-C4-ERGO CORONA MANUAL GUN

7.2.1

REPLACING THE SPRAY GUN

Before you commence the replacement of the spray gun any powder residue must be
removed thoroughly.
The wearing parts in the spray gun, marked in the spare parts list with "◆" , must be
regularly checked and, if necessary replaced.
5
4
3
1
2
P_01097
Procedure:
1. Switch off the control unit and/or the high-voltage generator.
2. Disconnect the electrical cable 1 from the control unit 2.
3. Disconnect the hoses for powder feed 3 and atomizing air 4 from the spray gun 5.
4. Connect the hoses for powder feed 3 and atomizing air 4 to the new spray gun 5.
5. Connect the electrical cable 1 to the control unit 2.
6. The spray gun is ready for use again.
69