Table of Contents
Advertisement
VERSION 07/2009
OPERATING MANUAL
6.9.3
CLEANING PROCESS WHEN USING MULTIPLE POWDER CONTAINERS (3L CONTAINER)
EP G
P_01137
ORDER NUMBER DOC 2305835
17
SPR INT
Procedure:
1. Release the trigger on the spray gun.
The high-voltage and the powder feed are
●
deactivated.
2. Remove the injector from the holder to stop powder
feed.
3. Guide the gun into the spray booth and start the
purge function by pressing the "rinse" button 17.
The injector and hoses are purged.
4. Switch off the control unit.
5. Loosen the powder feed hose from the powder
injector and clean the spray gun and the powder
feed hose thoroughly.
6. Loosen the blue dosage air hose and the red feed
air hose from the powder injector.
7. Replace the powder container.
8. Reconnect all the hoses and ground the powder
container again.
Hint:
Proper fl uidization is not possible with a damaged
and/or clogged fl uid base.
Prima
Sprint.
61
Advertisement
Table of Contents
