Mounting The Control Unit; Connection Requirements - WAGNER Prima Sprint Airfluid Translation Of The Original Operating Manual

Manual powder system
Table of Contents

Advertisement

VERSION 07/2009
OPERATING MANUAL
5.2

MOUNTING THE CONTROL UNIT

3
1
2
P_01133
5.3

CONNECTION REQUIREMENTS

The assembly of the manual powder system is the same for the Corona spray gun and for
the Tribo spray gun.
The manual system is equipped with a fi lter water separator 4 as standard. Nevertheless,
a high compressed air quality is still required for safe operation of the system. The system
operator is responsible for ensuring that the necessary compressed air quality is provided.
Outgoing air containing oil!
Risk of poisoning if inhaled
SIHI_05034_ENG
ORDER NUMBER DOC 2305835
4
Procedure:
1. Carefully take control unit 1 out of
Provide water-free and oil-free compressed air (quality standard
3.5.2 as per ISO 8573.1) 3.5.2 = 5 μm / +7°C; 44.6°F / 5mg/m³.
packaging and use the screws 2
supplied to screw to the holes drilled in
the angle bracket 3.
WARNING
Prima
Sprint.
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prima sprint 60lPrima sprint 3l

Table of Contents