Table of Contents
Advertisement
VERSION 07/2009
OPERATING MANUAL
5
PREPARATIONS FOR STARTING UP
Incorrect installation/operation!
Risk of injury and damage to equipment
SIHI_0050_GB
5.1
ASSEMBLING THE EQUIPMENT TROLLEY
The manual system's trolley is supplied unassembled for reasons associated with transport.
It must be assembled as described below.
25Nm;
18.44lb ft
P_01153
ORDER NUMBER DOC 2305835
When putting into operation and for all work, read and follow
the operating instructions and safety regulations for the addi-
tionally required system components.
WARNING
Procedure:
1. Open transport packaging with care and
carefully take all single parts out of
2
packaging.
2. Place lower trolley section 1 on a clean, level
surface.
3. Place upper trolley section 2 on the two
guide sleeves on lower trolley section 1,
press down gently until stop is reached and
1
use nuts and bolts (see details) to screw to
lower trolley section (tightening torque
25 Nm; 18.44 lb ft).
Prima
Sprint.
20
Advertisement
Table of Contents
