Audio-Audio Settings; Network-Network Setting-Network; Network-Network Setting-Port - Bolin Technology EX1000 Series User Manual

Audio-Audio Settings

This setting page is to select the audio compression parameters for the Audio input (microphone)
•
Audio Compression Options:
G.711A – Pulse Code Modulation (PCM),
o
often used to decode voice frequencies
with regard to Telephony
G.711U – Standard for speech
o
compression and decompression within
digital transmission systems
AAC – Advanced Audio Coding
o
•
Bit Rate
o
Bit rate supports 32K, 48K, 96K and
128K
•
Sampling Rate
o
Sampling rate supports 32K, 44.1K and
48K
•
Input Volume
o
0 to 100 adjustable by drag the input
volume bar, default is 80
NOTE:
•
Bit rate is fixed as 64K and Sampling rate fixed as 8K
when Audio Compression is set to G.711a and G.711u mode

Network-Network Setting-Network

The network tab is where the user is able to configure the following:
•
DHCP options
DHCP – An IP address will be
o
dynamically assigned to the camera from
the gateway (router)
Static IP – The user will enter / define the
o
IP address
•
IP Address
o
Default IP address is 192.168.0.13
•
Subnet Mask
o
Default mask is 255.255.255.0
•
Default Gateway
o
Default gateway is 192.168.0.1
•
Preferred DNS
•
Alternate DNS
•
MAC Address
Fixed, can't be modified.
o

Network-Network Setting-Port

This setting page is to specify which ports the camera will use to communicate with the following protocols:
o
TCP Port:
o
1 to 65535 adjustable
o
UDP Port:
o
1 to 65535 adjustable
o
RTSP: Default 554
o
RTSP is the protocol used to pull real-time
video over the network (using VLC Player
or other network video-compatible
software)
o
Changing this port number will change the
way the RTSP video can be viewed. Most
RTSP streaming software uses port 554 by
16