Bolin Technology EX1000 Series User Manual page 4

Dual output sdi+ip fhd ptz camer
Hide thumbs Also See for EX1000 Series:
Table of Contents

Advertisement

Intel mode, using the Intel graphics
card to do decoding, select this mode if
your PC/laptop graphics card is Intel.
Nvidia mode, using Nvidia graphics
card to do decoding, select this mode if
your PC/laptop graphics card is Nvidia.
NOTE: The Default is Adaptation mode, and the
decoding strategy is automatically selected by
the system, if is it not satisfied, please select the
actual graphics card to do decoding according to
your PC/laptop hardware configuration. Or select
the CPU mode if your PC/laptop without
independent graphics card.
For more stable usage, the PC/laptop that equipped Intel or Nvidia independent graphics card are recommended.
IP Firmware Update
The firmware update including two steps:
The First step is to select the firmware file and upload it to the camera IP module, this step will be fast.
The Second step is the firmware burning and updating, there will be a percentage progress bar display to indicate the
burning and updating status on the page.
the burning and updating process takes about 3 minutes, after the update is successful, the page will prompt "Upgrade is
successful...", please click OK button to reboot the camera.
Please don't power off or reboot the camera during the whole updating process, until the page prompt "Upgrade is
successful..."
Codec Setting
Video Compression supports H.264, H.265 and MJPG.
If video compression been selected MJPG mode, it will not support RTSP streaming features. For a better experience, it is
recommended to choose the H.264 or H.265 encoding.
IP Interface Reboot
The reboot action executed from IP interface will cause the camera go back to home position, but will not interrupt the HDMI/SDI
output.
Audio Input
Audio Compression supports AAC, G.711a and G.711u.
Bit Rate adjustable from 32K, 48K, 96K and 128K when in AAC mode
Sampling Rate adjustable from 32K, 44.1K and 48K when in AAC mode
NOTE:
Bit rate is fixed as 64K and Sampling rate fixed as 8K when Audio
Compression is set to G.711a and G.711u mode
If audio compression been changed, you have to close the browser and re-
login, otherwise, there will have noise of the audio output.
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sd500series

Table of Contents