Table of Contents
Advertisement
Capture: to take a screenshot of the camera video image;
Speaker: to turn on / off the preview audio on live view panel;
Mic: to enable/disable the Mic which built-in the camera;
Enlarge: to enlarge the camera preview image.
Click the Enlarge button, the button color will turn yellow, then you can click the preview image to zoom in, it supports
for zooming in by 3 times;
Shrink: to shrink the camera preview image.
After the preview image has been zoomed in by 3 times, you can click the Shrink button to start zooming out. The
function will available when this button been clicked and turn to yellow color, it supports for zooming out by 3 times;
Full Screen: to get full screen view of the camera image;
NOTE: Feature icons 1-7 are not supported in non-IE browsers, and these icons will not to be displayed in the interface
Home Position:
•
The first position where the camera will be in after
initializing(rebooting)
•
Once presets have been set up, one of the presets can be selected as
the Home Position. (set preset 1 as the Home Position usually)
Pan / Tilt
•
Use the arrow button to control the camera.
•
Pan/Tilt: pan and tilt, speed can be set from 1 to 8 by drag the
Pan/Tilt Speed setting bar
•
Zoom: zoom in and zoom out, zoom speed can be set from 1 to 8 by
drag the Zoom Speed setting bar.
•
Focus: supports Auto and Manual mode, focus speed can be set from
1 to 8 by drag the Focus Speed setting bar
PTZ Setting
This menu contains the section where the Auto Scanning, Preset, Patrol, Scanning, Power On Action, Cruise can be
configured.
Auto Scanning:
Camera image (pan) can be set to move horizontally from left to right or from
right to left continuously.
Moving speed can be programmed, speed level from 1-8 adjustable.
Preset:
Presets are predetermined positions that the user can recall the camera to recall
quickly, supports 255 presets at maximum.
To add a new preset:
1. Select Preset in the PTZ Setting bar.
2. Click Create button, it will extend preset number and name field.
3. Select a preset number and create a preset name, or just by default name
preset 1.
4. Click Enter and the preset will be saved.
The table will populate with all of the created presets, you can select a preset and
click Go To button, camera will recall this preset position quickly.
Any preset can be deleted by select the preset and clicking the Delete button.
9
Advertisement
Table of Contents
