•
Nvidia mode, using Nvidia graphics card to do decoding, select this mode if your PC graphics card is Nvidia;
NOTE: The default is adaptation mode, and the decoding strategy is automatically selected by the program. If it is not
satisfied, select the actual graphics card to do decoding according to your PC hardware configuration.
Local-Storage Setting-Storage Setting
This setting page is to allow administrator to set record
storage path and snap storage path.
Default path is D:\RecordVideos\ for record, and
D:\CaptureImages\ for snap.
You can click Browse button to change the path for both
record and snap storage.
NOTE: non-IE browsers login will not display this page
Operation log
The Log is where the camera stores all actions that are performed by the camera.
Select a Start Time and End Time, click search button, you will get all the log information of the camera during this
period. This is for administrator to monitor and maintain the camera IP interface.
Log event can be System Operation, Setting Operation and Alarm
Operation.
You can search all information by select All, or search the corresponding
information individually by each operation option.
23