Network-Network Setting-Ftp; Network-Network Setting-Multicast - Bolin Technology EX1000 Series User Manual

Rendezvous: SRT Rendezvous mode, the page will
expand the rendezvous mode settings menu, enable Main
Stream or Sun Stream as you want, and configure the
corresponding parameters.
• IP Address: The IP address of the other end SRT device
(configured in Rendezvous mode)
• Port: Configure a port for SRT session, it must match
the SRT port of the other end SRT device (configured in
Rendezvous mode)
• Stream ID: SRT streaming ID, you can set one or keep it
as default (please configure the same Stream ID on the
other end SRT device)
• Latency: Delay between the two SRT device (configured
in Rendezvous mode)
NOTE: When camera set to Rendezvous mode, then the
camera can only send SRT stream to one receiver
(configured in Listener mode).

Network-Network Setting-FTP

1. Check the Enable option
2. Input the FTP server IP address into the Server IP
option bar
3. Input the FTP port number into the Server Port option
bar, the port must be same as configured on FTP
server, it should be port 21 usually.
4. Input FTP server name and password into the Server
username and Server password option bar, it must be
same as configured on the FTP server
5. Select the Path Type and Path that you want the
snapshot be saved on FTP server
NOTE: FTP function is work with snapshot function
together, please make sure already enabled snapshot and
configured the properly interval of uploaded time.

Network-Network Setting-Multicast

This setting page is used to configure multicast for Main,
Second and Third stream, for save bandwidth purpose in
live streaming application. Here takes Main Stream for
example:
o
Following the Multicast address rang to configure
a multicast IP address for Main Stream;
o
Following the Multicast Port rang to configure a
multicast port for Main Stream;
o
Click the Apply button and restart camera once to
make the settings take effect;
o
After camera power cycle, click copy button to
copy the multicast URL address
User can use VLC Media Player to receive the camera
multicast stream, operation as below:
o
Running VLC Media Player
o
Click Media menu which on the upper left corner,
and select Open Network Stream...
19