Obtain Audio Signal - Bolin Technology UCC-2HD10BT-U32 User Manual


When the camera setting HDMI video format at 1080P50/1080P25/750P50, USB2.0 and USB3.0
resolution with frame rate are available as following list.
HDMI FORMAT
1080P50/1080P25/720P50
HDMI / DVI Video Signal
The camera can simultaneously stream HDMI video output with USB3.0 video output. The DVI port on the
rear panel is not for DVI video output but it is a composite port for multiple use. In order to use HDMI video
output, you need to use the Extension Module.
1. Connect the Extension Module to the camera composite port when the power is off. Turn on the
camera power, after the camera initializes, HDMI video signal can be activated automatically.
2. Connect HDMI cable in between the Extension Module and your HDMI display.
3. You now have HDMI video output.
4. You can use HDMI to DVI converter to obtain DVI video signal.

Obtain Audio Signal

1. The camera has built in Mic. It generates audio
signal to the video client software. In the software
Audio section find Microphone setting. "Digital
Audio Interface (USB3.0 Video Camera)" will be
listed. Once you select it as software audio device,
you can use the built-in Mic for communicating.
2. You can have external audio input by using
Extension Module (optional). The built-in Mic will
be deactivated after the external audio input is used.
USB2.0 Frame Rate
Resolution
1920x1080 10P
1280x720 25P/10P
1024x768
960x540
850x480
800x600
768x448
720x576
720x540
720x480
720x404
640x480
640x360 50P/25P/10P 640x360
352x288
12
USB3.0 Frame Rate
Resolution
1920x1080 50P/25P/10P
1280x720
1024x768
960x540
850x480
800x600
768x448
720x576
720x540
720x480
720x404
640x480
352x288