Bolin Technology EX1000 Series User Manual page 5

Dual output sdi+ip fhd ptz camer
Hide thumbs Also See for EX1000 Series:
Table of Contents

Advertisement

IP Video Format
IP video resolution and SDI/HDMI video resolution are bounded to PAL/NTSC format.
e.g. if SDI/HDMI video is set to 1080p60 resolution, then IP video can only be selected
under the PAL format resolution, such as 1080p60, 1080p30, 720p60 and 720p30, etc.
At this moment, the IP video cannot be selected 1080p50, 1080p25 and 720p50, etc.
NOTE: According to the SDI/HDMI video resolution that has been set to, the IP
resolution will only have available resolution displayed for you to select.
Video Stream Connection
For RTSP:
Connection String: rtsp://<IP address>:<RTSP port>/PSIA/Streaming/channels/0 <0 / 1>
By default, IP address is 192.168.0.13, RTSP port is 554
Channels/0 indicates the main stream, channels/1 indicates the sub stream
To receive RTSP for main stream: rtsp://192.168.0.13:554/PSIA/Streaming/channels/0
To receive RTSP for sub stream: rtsp://192.168.0.13:554/PSIA/Streaming/channels/1
NOTE: *Do not include brackets < > in connection URL strings
For Multicast
Connection String: udp://@<multicast IP address>:<multicast port>
Multicast IP address and port can be configured on camera IP web interface>Network>Multicast page
For example, if set multicast IP address to 224.5.6.7, set multicast port to 9000
To receive multicast stream: udp://@224.5.6.7:9000
Note: *Do not include brackets < > in connection URL strings
User can configure multicast IP address and port for Main stream, Second stream and Third stream separately.
For RTMP
This camera supports RTMP protocol, can push RTMP streaming to others video streaming platform, e.g. YouTube etc.
Connection String: RTMP stream URL/key
NOTE: User needs to login to the YouTube platform, get the RTMP stream URL and key, and then configure it to the RTMP
setting page of the camera's IP web interface.
For VMS Connection
When you use VMS (such as exacqVision) to connect the camera via ONVIF
protocol, you must to include the port 2000 for VMS connection.
For example: if the camera IP address is 192.168.0.13, you need to enter
192.168.0.13:2000 on VMS configuration menu.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sd500series

Table of Contents