Network-Network Setting-Rtmp - Bolin Technology EX1000 Series User Manual

default, therefore it is not recommended that this port number be changed.
o
URL for receive RTSP streaming is: rtsp://IP address:554/PSIA/Streaming/channels/0
o
VISCA Port (Visca over IP)
o
Default is 52381, it is match with Bolin Keyboard Controller
o
User can change the port number to others to match with third part keyboard controller
o
HTTP: Default 80
o
HTTP is the protocol used to access the web interface.
o
Changing this port number will require the user to specify the port number when entering the IP address
to the web browser.
o
For example, if it is changed to 85, the IP address will need to be entered as follows in order to access
the web interface: http://192.168.0.13:85
NOTE:
VMS Connection
If you use VMS (such as exacqVision) to connect the
camera via ONVIF protocol, you must to include the port
2000 for VMS connection.
For example: If the camera IP address is 192.168.0.13,
you need to enter 192.168.0.13:2000 on VMS
configuration menu.

Network-Network Setting-RTMP

This camera supports RTMP protocol, it can push streaming to other CDN or cloud platform.
o
Check the RTMP
Enable checkbox
o
Copy and paste the
stream URL from the
online platform
o
Copy and paste the
Stream Key (Also
known as the Stream
ID) from the online
platform.
Example below shows where to
copy the information from
URL+ Key is not meaning we
put the plus sign "+", just put
"/ "and then put the key after the URL
o
Click Apply on camera RTMP page
o
Allow a few minutes for the stream to connect. The status on your
streaming platform (Such as YouTube) will change to Live. When this happens, the camera is streaming video
Live to
NOTE: Similar steps can be followed to stream to any platform that supports RTMP, such as YouTube, Facebook,
Twitter, Twitch, etc.)
17
YouTube
have to