Table of Contents
Advertisement
Bolin FHD Dual Output PTZ camera IP web interface
This Quick Guide is for Bolin FHD Dual Output PTZ camera IP web interface use. Please read it carefully before you start using
your camera and follow the instruction to properly use the camera, or check it when you are having some trouble with IP video
streaming and IP control.
Please contact Bolin technical support team at www.bolintechnology.com if you have more questions or having trouble that is not
included in this guidance.
Note:
•
Supports Edge, Chrome, Firefox and Safari. Internet Explorer 11 browser.
•
When using Internet Explorer 11 browser.
o
It will be required to download the Controls (VideoPlugin) for the first-time login when using Internet
Explorer, please click the download link and follow the prompts to download and install it.
o
After the VideoPlugin has been installed, you may be prompted to update the VideoPlugin, please
uninstall the old version of Plugin before you download and install the new version of Plugin
•
When using Edge, Chrome, Firefox and Safari etc, non-IE browsers,
o
HTML5 is supported.
o
Video Plugin is not needed.
Some of the features are limited, like Privacy Mask, Live View page's Record, Capture, and other function
o
icons.
o
Live view latency may be 1-2 seconds longer than IE browser.
In this User Guide, illustration drawings and screen captures are taken from SD500 camera's IP Web Interface, other
applicable cameras have the same software. This User Guide can be also used for Bolin's EX1000 series PTZ cameras.
Login
The default static IP address of the camera is
192.168.0.13, and default subnet mask is 255.255.255.0.
Please change your PC/laptop's IP address to be located
within the same subnet as the camera.
The login procedure as following:
•
Open the browser, running it as Administrator
•
Enter the login page by typing: http://192.168.0.13
•
By default, Username: admin, Password: admin
•
The IP camera supports strong password
function, it requires to change the password for
the first-time login
NOTE: If the camera IP address has been modified, the
login page URL should be http://x.x.x.x (x.x.x.x is the
correct IP address of the camera)
Hardware Decoding
The camera supports FHD resolution on both HDMI/SDI and IP interface, it may consume more hardware performance of the
PC/laptop when using the IP interface.
Hardware decoding supports Adaptation, CPU, Intel and Nvidia mode.
•
Adaptation mode (default), a better strategy for decoding based on the PC/laptop hardware configuration will be
automatically selected by system.
•
CPU mode, using CPU to do decoding, it will consume a lot of CPU resources, only select it if there is no independent
graphics card or the graphics card is poor.
User Quick Notice Guide
3
Advertisement
Table of Contents
