Audio In / Out - Bolin Technology 2 Series User Manual

Camera Initial setting status Information
Information of the camera initial setting status will display for 5 seconds.
1. Camera PELCO ID for RS-485 control
2. Camera ID for IR Remote Controller
3. IR remote control signal receive current setting
4. Baud Rate current setting
5. Control COMM Port current setting
6. Video format current setting
7. HDMI current setting
8. Model number
9. Firmware version

Audio IN / OUT

Use the USB port to 3.5mm audio jack adaptor (VCC-UA35IO) to connect audio source.
Note
The USB port is only used for Audio physical input and output signal connection. The audio signal can be used for IP
video streaming, USB video streaming, HDMI/SDI?
•
A microphone can be connected to the Audio IN port, which feeds audio into the camera. (It does not support
power supply to microphone).
•
A speaker can be connected to the Audio OUT port, which will output any audio that is captured on the Audio
In port
•
See Manual part 2 for more information about Audio capture
Camera Status Info Display
PELCO ID
IR ID
IR-RECEIVE
BAUD RATE
COMM TYPE
FORMAT
HDMI OUT
MODEL TYPE
SV:
14
001
01
ON
9600
422
1080P29.97
YUV
----
V0B1100S36040AD04