Yamaha N MAX GPD150-A 2015 Service Manual page 225

REAR SHOCK ABSORBER ASSEMBLIES AND SWINGARM
Distance "a" (between the wheel
sensor rotor and swingarm (edge
of the wheel sensor installation
hole))
18.92–19.60 mm (0.74–0.77 in)
b
2
a
7. Install:
• Rear wheel sensor
Rear wheel sensor bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
ECA22910
NOTICE
Make sure there are no foreign materials in
the rear wheel sensor. Foreign materials
cause damage to the rear wheel sensor.
TIP
To route the rear wheel sensor lead, refer to
"CABLE ROUTING" on page 2-29.
8. Install:
• Rear brake hose holder (rear side) "1"
Rear brake hose holder bolt (rear
side)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
TIP
Fit the projection "a" on the rear brake hose hold-
er into the hole "b" in the swingarm.
1
1
a
b
4-92