Yamaha N MAX GPD150-A 2015 Service Manual page 410

Fault code No.
Item
Symptom
Order Item/components and probable cause
3 Front brake dragging
4 Defective hydraulic unit assembly
Fault code No. 42, 47
Fault code No.
Item
Symptom
Order Item/components and probable cause
1 Incorrect installation of the rear wheel
sensor (for fault code No. 42)
2 Incorrect rotation of the rear wheel
3 Rear brake dragging
4 Defective hydraulic unit assembly
ABS (ANTI-LOCK BRAKE SYSTEM)
41
Front wheel ABS (intermittent wheel speed pulses or incorrect de-
pressurization)
• Pulses from the front wheel sensor are received intermittently while
the vehicle is traveling.
• Front wheel will not recover from the locking tendency even though
the signal is transmitted from the ABS ECU to reduce the hydraulic
pressure.
Check or maintenance job
Check that the brake fluid pressure is correctly transmit-
ted to the brake caliper when the brake lever is operated
and that the pressure decreases when the lever is re-
leased.
Refer to "CHECKING THE FRONT BRAKE DISC" on
page 4-42.
If the above items were performed and no malfunctions
were found, replace the hydraulic unit assembly.
Refer to "ABS (ANTI-LOCK BRAKE SYSTEM)" on page
4-61.
42
47
Rear wheel ABS (intermittent wheel speed pulses or incorrect depres-
surization)
• Pulses from the rear wheel sensor are received intermittently while
the vehicle is traveling. (for fault code No. 42)
• Rear wheel will not recover from the locking tendency even though
the signal is transmitted from the ABS ECU to reduce the hydraulic
pressure.
Check or maintenance job
Check the components for looseness, distortion, and
bends.
Refer to "CHECKING THE REAR WHEEL" on page
4-34.
Check that there is no brake disc drag on the wheel and
make sure that it rotates smoothly.
Refer to "CHECKING THE REAR WHEEL" on page
4-34.
Check that the brake fluid pressure is correctly transmit-
ted to the brake caliper when the brake lever is operated
and that the pressure decreases when the lever is re-
leased.
Refer to "CHECKING THE REAR BRAKE DISC" on
page 4-55.
If the above items were performed and no malfunctions
were found, replace the hydraulic unit assembly.
Refer to "ABS (ANTI-LOCK BRAKE SYSTEM)" on page
4-61.
8-85