Removing The Ac Magneto; Installing The Ac Magneto - Yamaha N MAX GPD150-A 2015 Service Manual

EAS31239

REMOVING THE AC MAGNETO

1. Remove:
• AC magneto rotor nut "1"
• Washer
TIP
While holding the AC magneto rotor "2" with the
rotor holding tool "3", loosen the AC magneto ro-
tor nut.
Rotor holding tool
90890-01235
Universal magneto and rotor
holder
YU-01235
2
2. Remove:
• AC magneto rotor "1"
(with the flywheel puller "2")
• Woodruff key
ECA21740
NOTICE
To protect the end of the crankshaft, place an
appropriate sized socket between the fly-
wheel puller center bolt and the crankshaft.
TIP
Make sure the flywheel puller is centered over
the AC magneto rotor.
Flywheel puller
90890-01189
Flywheel puller
YM-01189
3
1
5-49
1
EAS31240

INSTALLING THE AC MAGNETO

1. Install:
• Woodruff key
• AC magneto rotor
• Washer
• AC magneto rotor nut
TIP
• Clean the tapered portion of the crankshaft and
the AC magneto rotor hub.
• When installing the AC magneto rotor, make
sure the woodruff key is properly seated in the
keyway of the crankshaft.
2. Tighten:
• AC magneto rotor nut "1"
AC magneto rotor nut
80 Nm (8.0 m·kgf, 58 ft·lbf)
TIP
While holding the AC magneto rotor "2" with the
rotor holding tool "3", tighten the AC magneto ro-
tor nut.
Rotor holding tool
90890-01235
Universal magneto and rotor
holder
YU-01235
2
AC MAGNETO
2
3
1