Yamaha N MAX GPD150-A 2015 Service Manual page 23

12
1. Brake master cylinder
2. Brake light switch
3. ABS motor
4. Hydraulic pump
5. Buffer chamber
6. Outlet solenoid valve
7. Inlet solenoid valve
Emergency braking (ABS activated)
1. Depressurizing phase
When the front wheel is about to lock, the outlet solenoid valve is opened by the "depressurization"
signal transmitted from the ABS ECU. When this occurs, the inlet solenoid valve compresses the
spring and closes the brake line from the brake master cylinder. Because the outlet solenoid valve
is open, the brake fluid is sent to the buffer chamber. As a result, the hydraulic pressure in the brake
caliper is reduced.
The brake fluid stored in the buffer chamber is pumped back to the brake master cylinder by the hy-
draulic pump linked to the ABS motor.
7
8
9
13
3
4
6
10
11
8. Brake caliper
9. Wheel sensor
10. ABS ECU
11. ABS warning light
12. Brake fluid pressure
13. Time
1-14
FEATURES
5