Starting Circuit Cut-Off System Operation - Yamaha N MAX GPD150-A 2015 Service Manual

EAS30494

STARTING CIRCUIT CUT-OFF SYSTEM OPERATION

If the main switch is turned to "ON" and the start switch " " is pushed, the starter motor can only oper-
ate if at least one of the following conditions is met:
• The front brake lever is pulled to the handlebar (the front brake light switch is closed) and the side-
stand is up (the sidestand switch is closed).
• The rear brake lever is pulled to the handlebar (the rear brake light switch is closed) and the sidestand
is up (the sidestand switch is closed).
1. Battery
2. Main fuse 1
3. Main switch
4. Signaling system fuse
5. Rear brake light switch
6. Front brake light switch
7. Start switch
8. Diode
9. Sidestand switch
10. Starter relay
11. Starter motor
ELECTRIC STARTING SYSTEM
11
10
1
2
5 6
3
4
8-7
7
8
9