Diagnostic Code: Actuator Operation Table - Yamaha N MAX GPD150-A 2015 Service Manual

SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE
Diagnostic
code No.
61 Malfunction history code dis-
play
• No history
• History exists
62 Malfunction history code era-
sure
• No history
• History exists
67 ISC (idle speed control)
learning condition display
ISC (idle speed control)
learning data erasure
70 Control number
EAS31121

DIAGNOSTIC CODE: ACTUATOR OPERATION TABLE

Diagnostic
code No.
30 Ignition coil
Item
00
Fault codes 12–84
• (If more than one code
number is detected, the
display alternates every
two seconds to show all the
detected code numbers.
When all code numbers are
shown, the display repeats
the same process.)
00
• Displays the total number
of malfunctions, including
the current malfunction,
that have occurred since
the history was last erased.
(For example, if there have
been three malfunctions,
"03" is displayed.)
00
ISC (idle speed control)
learning data has been
erased.
01
It is not necessary to erase
the ISC (idle speed control)
learning data.
02
It is necessary to erase the
ISC (idle speed control)
learning data.
0–254 [-]
Item
Actuates ignition coil five
times at one-second inter-
vals.
The "CHECK" indicator and
"
nostic tool screen come on
each time the ignition coil is
actuated.
Tool display
Actuation
" on the Yamaha diag-
9-7
Procedure
—
—
To erase the history, click
"Action" on the Yamaha diag-
nostic tool screen.
To erase the ISC (idle speed
control) learning data, click
"Action" on the Yamaha diag-
nostic tool screen 3 times in
5 seconds.
—
Procedure
Check that a spark is gener-
ated five times.
• Connect an ignition check-
er.