Yamaha N MAX GPD150-A 2015 Service Manual page 271

Secondary sheave nut
55 Nm (5.5 m·kgf, 40 ft·lbf)
TIP
While holding the secondary sheave with the ro-
tor holding tool "2", tighten the secondary
sheave nut with the socket wrench "3".
Rotor holding tool
90890-04166
YM-04166
Socket wrench (39 mm)
90890-01493
2
1
3
3. Install:
• Clutch housing "1"
• Clutch housing nut "2"
Clutch housing nut
45 Nm (4.5 m·kgf, 33 ft·lbf)
TIP
While holding the clutch housing with the rotor
holding tool "3", tighten the clutch housing nut.
Rotor holding tool
90890-04166
YM-04166
1
2
4. Install:
• Primary sliding sheave assembly "1"
V-BELT AUTOMATIC TRANSMISSION
3
TIP
When installing the primary sliding sheave as-
sembly, hold the cam to prevent the primary
sheave weights from falling out of the primary
sliding sheave.
5. Install:
• V-belt "1"
ECA21720
NOTICE
Do not allow grease to come in contact with
the V-belt.
TIP
• Install the V-belt with the printed arrow mark on
the V-belt facing in the direction shown in the il-
lustration.
• Install the V-belt onto the primary sheave side.
1
6. Install:
• Primary fixed sheave "1"
• Washer
• Conical spring washer "2"
• Primary fixed sheave nut
ECA21730
NOTICE
Do not allow grease to contact the primary
sheave assembly.
TIP
• Apply lithium-soap-based grease to the prima-
ry fixed sheave nut side of the conical spring
washer and to the threaded portion of the
crankshaft.
5-42
1