Checking The Radiator; Installing The Radiator - Yamaha N MAX GPD150-A 2015 Service Manual

EAS30439

CHECKING THE RADIATOR

1. Check:
• Radiator fins
Obstruction → Clean.
Apply compressed air to the rear of the radia-
tor.
Damage → Repair or replace.
TIP
Straighten any flattened fins with a thin, flathead
screwdriver.
2. Check:
• Radiator hoses
• Coolant reservoir hose
Cracks/damage → Replace.
3. Measure:
• Radiator cap valve opening pressure
Below the specified pressure → Replace the
radiator cap.
Radiator cap valve opening pres-
sure
78.6–137.4 kPa (0.78–1.37
kgf/cm², 11.5–19.9 psi)
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Install the radiator cap tester "1" and radiator
cap tester adapter "2" to the radiator cap "3".
Radiator cap tester
90890-01325
Mityvac cooling system tester kit
YU-24460-A
Radiator cap tester adapter
90890-01352
Pressure tester adapter
YU-33984
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
b. Apply the specified pressure for ten seconds
and make sure there is no drop in pressure.
▲ ▲▲▲ ▲ ▲▲▲ ▲
4. Check:
• Radiator fan
Damage → Replace.
EAS30440

INSTALLING THE RADIATOR

1. Fill:
• Cooling system
(with the specified amount of the recom-
mended coolant)
Refer to "CHANGING THE COOLANT" on
page 3-19.
2. Check:
• Cooling system
Leaks → Repair or replace any faulty part.
▼ ▼▼▼ ▼ ▼▼▼ ▼
a. Attach the radiator cap tester "1" to the radia-
tor.
▼▼▼
1
b. Apply 196 kPa (1.96 kg/cm², 27.87 psi) of
pressure.
c. Measure the pressure to check its maintain-
ing applied pressure.
▲ ▲▲▲ ▲ ▲▲▲ ▲
6-3
RADIATOR
2
3
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
Radiator cap tester
90890-01325
Mityvac cooling system tester kit
YU-24460-A
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
1
▲ ▲▲▲ ▲ ▲▲▲
▼ ▼▼▼ ▼ ▼▼▼
▲ ▲▲▲ ▲ ▲▲▲