Yamaha N MAX GPD150-A 2015 Service Manual page 93

1. Rear brake caliper
2. Rear wheel sensor
3. Rear wheel sensor lead
4. Radiator
5. Coolant reservoir hose
6. Rear brake hose (hydraulic unit to rear brake
caliper)
7. Swingarm
8. Rear brake hose bracket
9. Rear brake hose holder
10. AC magneto lead
A. Connect the coolant reservoir hose to the radiator,
and then fasten the hose by inserting the projection
on the holder into the hole in the rear brake hose
bracket and rear brake hose holder.
B. Position the holder within the range shown in the
illustration.
C. Route the rear brake hose (hydraulic unit to rear
brake caliper) through the guide.
D. Upward
E. Downward
2-46
CABLE ROUTING