Yamaha N MAX GPD150-A 2015 Service Manual page 305

Water pump assembly bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
TIP
• Align the projection "a" on the impeller shaft
with the slit "b" on the camshaft sprocket bolt.
• Lubricate the O-ring with a thin coat of lithium-
soap-based grease.
a
2
New 1
2. Fill:
• Cooling system
(with the specified amount of the recom-
mended coolant)
Refer to "CHANGING THE COOLANT" on
page 3-19.
3. Check:
• Cooling system
Leaks → Repair or replace any faulty part.
Refer to "INSTALLING THE RADIATOR" on
page 6-3.
4. Measure:
• Radiator cap opening pressure
Below the specified pressure → Replace the
radiator cap.
Refer to "CHECKING THE RADIATOR" on
page 6-3.
b
LS
6-10
WATER PUMP