Removing The Tail/Brake Light Outer Cover; Installing The Tail/Brake Light Outer Cover; Removing The Front Side Cover; Installing The Front Side Cover - Yamaha N MAX GPD150-A 2015 Service Manual

EAS31681
REMOVING THE TAIL/BRAKE LIGHT OUTER
COVER
1. Remove:
• Tail/brake light outer cover "1"
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Remove the tail/brake light outer cover
screws.
b. Slide the tail/brake light outer cover rearward
to remove the projection "a" on the cover from
the hole "b" in the tail/brake light.
▲ ▲▲▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
EAS31682
INSTALLING THE TAIL/BRAKE LIGHT
OUTER COVER
1. Install:
• Tail/brake light outer cover "1"
▼ ▼▼▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
a. Slide the tail/brake light outer cover forward,
fit the projection "a" on the cover into the hole
"b" in the tail/brake light.
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
b
1
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
b. Install the tail/brake light outer cover screws,
and then tighten the screws to specification.
▼▼▼
▲ ▲▲▲ ▲ ▲▲▲ ▲
EAS31683

REMOVING THE FRONT SIDE COVER

The following procedure applies to both of the
front side cover.
1. Remove:
• Front side cover "1"
a
▲▲▲
▼ ▼▼▼ ▼ ▼▼▼ ▼
a. Remove the front side cover screws.
b. Pull the front side cover outward to remove
the projections "a" from the grommets "b".
▼▼▼
▲ ▲▲▲ ▲ ▲▲▲ ▲
EAS31684

INSTALLING THE FRONT SIDE COVER

The following procedure applies to both of the
front side cover.
1. Install:
• Front side cover "1"
4-5
GENERAL CHASSIS (2)
Tail/brake light outer cover screw
1.8 Nm (0.18 m·kgf, 1.3 ft·lbf)
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼
b
a
▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲
a
b
1
▲ ▲▲▲ ▲ ▲▲▲
▼ ▼▼▼ ▼ ▼▼▼
b
a
1
▲ ▲▲▲ ▲ ▲▲▲