Removing The Fuel Tank; Removing The Fuel Pump; Removing The Fuel Filter; Checking The Fuel Pump Body - Yamaha N MAX GPD150-A 2015 Service Manual

EAS30450

REMOVING THE FUEL TANK

1. Extract the fuel in the fuel tank through the
fuel tank cap with a pump.
2. Disconnect:
• Fuel sender coupler
• Fuel pump coupler
• Fuel hose
EWA18020
WARNING
Cover the fuel hose connection with a cloth
when disconnecting it. Residual pressure in
the fuel lines could cause fuel to spurt out
when removing the hose.
ECA20020
NOTICE
Although the fuel has been removed from
the fuel tank, be careful when removing the
fuel hose, since there may be fuel remaining
in it.
TIP
• To remove the fuel hose from the fuel pump,
slide the fuel hose connector cover "1" on the
end of the hose in the direction of the arrow
shown, and then remove the hose.
• Before removing the hose, place a few rags in
the area under where it will be removed.
3. Remove:
• Fuel tank
EAS30451

REMOVING THE FUEL PUMP

1. Remove:
• Fuel pump
ECA14721
NOTICE
• Do not drop the fuel pump or give it a
strong shock.
• Do not touch the base section of the fuel
sender.
1
7-2
EAS31376

REMOVING THE FUEL FILTER

1. Remove:
• Fuel filter "1"
TIP
Remove the projections "a" on the fuel pump
from the holes "b" in the fuel filter and slide the
fuel filter in the direction of the arrow shown to
remove it.
EAS30454

CHECKING THE FUEL PUMP BODY

1. Check:
• Fuel pump body
Obstruction → Clean.
Cracks/damage → Replace fuel pump as-
sembly.
EAS31249

CHECKING THE FUEL FILTER

1. Check:
• Fuel filter
Damage → Replace.
Contaminants → Clean with solvent.
EAS31377

INSTALLING THE FUEL FILTER

1. Install:
• Fuel filter "1"
TIP
Fit the projections "a" on the fuel pump into the
holes "b" in the fuel filter and slide the fuel filter
in the direction of the arrow shown to install it.
FUEL TANK
1
b
a
1
b
a