System Summary - Raven Command FLEX II Calibration And Operation Manual

Type
Product 1: valve PWM max
Notification
Product 1: valve PWM min
Road mode active
Tank rinse in progress
Zero speed shutoff

SYSTEM SUMMARY

Displays information configured during the setup process but does not provide the option to modify the
configuration:
UT Menu
1. Open the UT Menu and select the RCM - Sprayer Menu button.
2. Select the Diagnostics softkey along the right side of the page.
3. Select the System Summary tab.
Diagnostics: System Diagnostics
Description
• Check for electric or manual valves and sump
• Check tip sizes and target rates and pressures.
• Increase engine RPM.
• Decrease operation speed.
• Check pressure and flow sensor operation.
• Check sparge or recirculation system valve
• Check PWM MAX value.
• Check PWM control range using PWM Health
• Check target flow or pressure against
• Check for electric or manual valves opening
• Check tip sizes and target rates and pressures.
• Decrease engine RPM.
• Increase operation speed.
• Check pressure and flow sensor operation.
• Check sparge or recirculation system valve
• Check PWM MIN value.
• Check PWM control range using PWM Health
• Check target flow or pressure against
• Check road position switch for "On" condition.
• Check tank rinse status.
• Cycle system power.
• Increase vehicle speed and cycle master
RCM - Sprayer Menu
Recommended Actions
opening properly.
positions.
Test. Overall range should be >20%.
machine pump and delivery system
specifications.
properly.
positions.
Test. Overall range should be >20%.
machine pump and delivery system
specifications.
switch.
Diagnostics
DIAGNOSTICS
System
Summary
81