Reset A Register - Raven Command FLEX II Calibration And Operation Manual

CHAPTER 7

RESET A REGISTER

To reset the Lifetime Totals or Distance Totals register:
UT Menu
or
RCM - Sprayer Menu Totals Lifetime Distance Reset
Totals Totals Register
1. Open the UT Menu and select the RCM - Sprayer Menu button.
2. From the home screen, select the Totals softkey along the right side of the display.
3. Select the Lifetime Totals and the desired product channel or Distance totals tab along the top of the page.
NOTE: The Device Totals cannot be reset by the machine operator.
4. Select the Reset button to reset all the Totals displayed on the page.
5. Accept the confirmation prompt to proceed with resetting the selected registers.
6. Repeat the above process to reset other Totals as desired.
60 RCM - Sprayer and AIM Command FLEX™ II Calibration and Operation Manual