Chapter 7 Totals; Using Totals - Raven Command FLEX II Calibration And Operation Manual

CHAPTER
7

USING TOTALS

To access the RCM - Sprayer Totals pages:
UT Menu
RCM - Sprayer Menu
1. Open the UT Menu and select the RCM - Sprayer Menu button.
2. From the home screen, select the Totals softkey along the right side of the display. The following tally
information tabs are available:
Lifetime Totals. Provides application tally information for each product control channel.
Depending upon your reporting or data needs, application tallies for each control channel may be
accumulated for the day or week of operation, or may be reset after each field. This information is available to
the UT (e.g. Viper 4) and can be included with the application or coverage reports.
NOTE: Each product control channel must be reset separately.
Device Totals. Displays a running tally of the operating life of the RCM - Sprayer system. This includes the runtime
of the ECU, the runtime of the NCVs, and the total area covered. This tally cannot be reset by the machine
operator.
Distance Totals. Provides the operator with operation information such as current equipment speed and distance
traveled since the Distance Totals were last reset.
The distance registers may also be helpful when fine tuning the RCM - Sprayer system or to assist with
troubleshooting procedures.
Totals: Using Totals
T OTALS
C H A P T E R 7
Totals Lifetime Device Distance
Totals Totals Totals
59