Device Certification And Qualification - Texas Instruments SimpleLink CC3220MOD Series Manual

CC3220MOD, CC3220MODA
SWRS206E – MARCH 2017 – REVISED MAY 2021
Table 9-5. CC3220MODx and CC3220MODAx Functional Configurations (continued)
NAME
UARTLOAD_FUNCTIONAL_4WJ
RET_FACTORY_IMAGE

9.10 Device Certification and Qualification

The CC3220MODx and CC3220MODAx modules from TI are certified for FCC, IC, ETSI/CE, Japan MIC, and
SRRC. Moreover, the module is also Wi-Fi CERTIFIED™ with the ability to request a certificate transfer for Wi-Fi
alliance members. TI customers that build products based on the CC3220MODx or CC3220MODAx from TI can
save in testing cost and time per product family.
Table 9-6. CC3220MODx and CC3200MODAx List of Certifications
Regulatory Body
FCC (USA)
IC (Canada)
ETSI/CE (Europe)
MIC (Japan)
SRRC (China)
9.10.1 FCC Certification and Statement
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
limits. This transmitter must not be co-located or operating with any other antenna or transmitter.
The CC3220MODx and CC3220MODAx modules from TI are certified for the FCC as a single-modular
transmitter. The modules are FCC-certified radio modules that carries a modular grant.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
58 Submit Document Feedback
SOP[2] SOP[1] SOP[0]
Pulldown Pullup Pulldown
Pulldown Pullup Pullup
Specification
Part 15C + MPE FCC RF Exposure
RSS-102 (MPE) and RSS-247 (Wi-Fi)
EN300328 v2.1.1 (2.4GHz Wi-Fi)
EN62311:2008 (MPE)
EN301489-1 v2.1.1 (General EMC)
EN301489-17 v3.1.1 (EMC)
EN60950-1:2006/A11:2009/A1:2010/
A12:2011/A2:2013
Article 49-20 of ORRE
EN300328 v1.7.1
CAUTION
Product Folder Links: CC3220MOD CC3220MODA
SoP MODE
Supports Flash and SRAM load through
UART and functional mode. The MCU
bootloader tries to detect a UART break
on UART receive line. If the break
LDfrUART_FnWJ signal is present, the device enters the
UARTLOAD mode, otherwise, the device
enters the functional mode. TDI, TMS,
TCK, and TDO are available for debugger
connection.
When module reset is toggled, the MCU
RetFactDef bootloader kickstarts the procedure to
restore factory default images.
ID (IF APPLICABLE)
Z64-CC3220MOD
451I-CC3220MOD
—
—
—
—
—
201-170386
CC3220MODSM2MOB: 2017DJ2948(M)
CC3220MODSF12MOB: 2017DJ2944(M)
CC3220MODASM2MON: 2017DJ3095
CC3220MODASF12MON: 2017DJ3121
Copyright © 2021 Texas Instruments Incorporated
www.ti.com
COMMENT