14
Carbon Canister (If Equipped)
1. Carbon Canister 2. Molded Vent Tube (Fuel Tank to Canister) 3. Vent Tube (Canister to Engine) 4. Vent Tube (Canister to Atmosphere)
1644
CARBON CANISTER REMOVAL
1.
Disable the vehicle. See Disabling the Vehicle on page 1-3.
2.
Remove seat bottom from vehicle.
3.
Remove hose clamps, securing three hoses to canister, and disconnect hoses (Figure 14-6, Page 14-10).
4.
Push/pull the canister to force it from its mounting bracket.
CARBON CANISTER INSTALLATION
1.
Align canister mounting tabs with slots in mounting bracket and push/pull the canister into bracket (Figure 14-6,
Page 14-10). Force it in until fully seated.
2.
Attach hoses to appropriate locations on carbon canister and secure with hose clamps.
3.
Install seat bottom.
Page 14-10
2009-2012 XRT 950 Maintenance and Service Manual
Figure 14-6 Carbon Canister, Hoses and Routing
FUEL SYSTEM
1