Club Car XRT 950 2009 Maintenance And Service Manual page 23

GENERAL INFORMATION
6. Connect the end of the second cable to the negative (-) terminal of the booster battery. Connect the other end of
the same cable to the negative (-) terminal of the disabled vehicle battery (Figure 3-7, Page 3-7).
7. Start the engine. After the engine has started, remove the cable from the negative (-) terminal of the disabled
vehicle battery first. Next, remove the other end of the cable from the negative (-) terminal of the booster battery.
Then, remove the cable from the positive (+) terminal of the solenoid followed by the other end of the cable
from the positive (+) terminal of the booster battery.
1640
Figure 3-6 Positive (+) Cable to Battery Side of Solenoid
Using a Booster Battery (Jump Starting)
1641
Figure 3-7 Negative (-) Cable to Negative Terminal of
2009-2012 XRT 950 Maintenance and Service Manual
Weak Battery
3
Page 3-7