Settings/Security Settings - Grandstream Networks GVC3210 Administration Manual

https://arttel.ru/

Settings/Security Settings

Parameters
Web/SSH Access
Disable SSH
Access Method
Port
Current Admin
Password
New Admin
Password
Confirm new
Admin Password
New User
Password
Confirm New
User Password
Screen lock
Delete screen
lock password
Screen lock
password
Confirm screen
lock password
SIP
SIP TLS
Certificate
SIP TLS Private
Key
SIP TLS Private
Key Password
Trusted CA
Certificates
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
Descriptions
It is used to set if the device will block the SSH port. If it is set to "Yes", the device will
block any SSH access to it. The default setting is "No".
It is used to set which protocol will be used to access the device's Web GUI. It can be
selected from HTTP and HTTPS. The default setting is HTTP.
It is used to set which port will be used to access the device's Web GUI. By default, if
HTTP is selected, the port number will be 80; if HTTPS is selected, the port number
will be 443.
Enter current administrator's password. This field is case sensitive. The maximum
length is 32 characters.
Allows the user to change the admin password. The password field is purposely blank
after clicking the "Save" button for security purpose. This field is case sensitive with a
maximum length of 32 characters.
Enter the new Admin password again to confirm.
Allows the administrator to set the password for user-level web GUI access. This field
is case sensitive with a maximum length of 32 characters.
Enter the new User password again to confirm.
Allows the administrator to clear the screen lock password without submitting the old
one if it was configured.
Allows the administrator to set a password for screen lock. The field supports 6-digit
number.
It is used to enter the new screen lock password again to confirm.
Defines the SSL certificate used for SIP over TLS. The device supports SIP over TLS
encryption, realizing it via the built-in private key and SSL certificate. The SSL
certificate the user specifies for TLS encryption should be X.509 format.
Defines the SSL private key used for SIP over TLS. The SSL private key the user
specified for TLS encryption should be X.509 format.
Defines the SSL private key password used for SIP over TLS.
Used to upload trusted CA certificates. Users could upload up to 6 trusted CA
certificates to be used for application as well as SIP calls when TLS is used.
GVC3210 Administration Guide
Version 1.0.1.21
P a g e | 65