It is used to configure the IP address for the Contact header and Connection
Use NAT IP
Information in the SIP/SDP message. It should ONLY be used if it's required by your
ITSP. The default setting is keep the box blank.
SETTINGS/SECURITY SETTINGS
Parameters
Descriptions
Web/SSH Access
It is used to set if the device will block the SSH port. If it is set to "Yes", the device
Disable SSH
will block any SSH access to it. The default setting is "No".
It is used to set which protocol will be used to access the device's Web GUI. It can
Access Method
be selected from HTTP and HTTPS. The default setting is HTTP.
It is used to set which port will be used to access the device's Web GUI. By default,
Port
if HTTP is selected, the port number will be 80; if HTTPS is selected, the port
number will be 443.
It is used to set the administrator password for Web GUI. It is case sensitive with a
Admin Password
maximum length of 32 characters. The default password is "admin".
It is used to set the user password for Web GUI. It is case sensitive with a maximum
User Password
length of 32 characters. The default password is "123".
SIP
Defines the SSL certificate used for SIP over TLS to access particular websites. The
device supports SIP over TLS encryption, realizing it via the built-in private key and
SIP TLS Certificate
SSL certificate. The SSL certificate the user specifies for TLS encryption should be
X.509 format.
SIP TLS Private
Defines the SSL private key used for SIP over TLS. The SSL private key the user
Key
specified for TLS encryption should be X.509 format.
SIP TLS Private
Defines the SSL private key password used for SIP over TLS.
Key Password
MAINTENANCE
Maintenance section lists Upgrade, Recording, Time & Language, Troubleshooting and Reboot.
MAINTENANCE/UPGRADE
Parameters
Descriptions
Firmware Version 1.0.1.48
www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
GVC3200/GVC3202 Administration Guide
Page 55 of 71