Grandstream Networks GVC3210 Administration Manual page 27

https://arttel.ru/
IPv4 Settings

Address Type
Allow users to configure the appropriate network settings on the device. Users could select "DHCP",
"Static IP" or "PPPoE". By default, it is set to "DHCP".

IP Address
Enter the IP address when static IP is used.

Subnet Mask
Enter the subnet mask when static IP is used.

Default Router
Enter the default router when static IP is used.

DNS Server 1
Enter the DNS Server 1 address when static IP is used.

DNS Server 2
Enter the DNS Server 2 address when static IP is used.

PPPoE Account ID
Enter the PPPoE account ID when PPPoE is used.

PPPoE Password
Enter the PPPoE password when PPPoE is used.
IPv6 Settings

IPv6 address
Allow users to configure the appropriate network settings on the device. Users could select "DHCP"
or "Static IP". By default, it is set to "DHCP"

Static IPv6 address
Enter the IP address when "Static IP" is used.

IPv6 prefix length
Enter the IPv6 prefix length when "Static IP" is used.

DNS Server 1
Enter the DNS Server 1 address when "Static IP" is used.

DNS Server 2
Enter the DNS Server 2 address when "Static IP" is used.
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
GVC3210 Administration Guide
Version 1.0.1.21
P a g e | 27