Settings/Call Features - Grandstream Networks GVC3210 Administration Manual

https://arttel.ru/
Enable
Presentation
Automatically
When HDMI
Plugged
Camera
Move speed
Initial position

Settings/Call Features

Parameters
Start Video
Automatically
Filter Characters
Disable
Call-Waiting
Disable Call-
Waiting Tone
Disable DND
Reminder Ring
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
resolution supported by both will be used. The device will automatically obtain the
optimal resolution when it boots up for the first time.
Whether to enable presentation automatically when HDMI is plugged.

When this option is enabled, the GVC3210 will automatically goes to
Presentation mode.

When this option is disabled, the GVC3210 will invite user to choose "OK" by
default, also if Timeout (30s) is reached, the GVC3210 should switch to
presentation mode automatically.
The default setting is "No".
Specifies the moving speed and zoom speed for the camera. "1" is slowest and "16"
is fastest. The default setting is "5".
Specifies the initial position of the camera when the device is powered up.

System default position: The camera moves to its default position after
bootup.

Position when power off: After bootup, the camera moves to the latest
position before reboot. The default setting is System default position.
Descriptions
It is used to set if the device will enable the video feature automatically when it makes
an outbound call. If set to "Yes", the video codec attributes will be included in the SIP
INVITE message. The default setting is "Yes".
Configures the characters for filter when dialing out numbers. Multiple characters are
allowed. For example, if set to [()-], when dialing (0571)-8800-8888, the characters ()-
will be automatically filters and number 057188008888 will be dialed directly. The
default setting is [()-].
It is used disable call waiting feature. If it is checked, the device will reject the second
incoming call during an active session without user's knowledge. But this missed call
record will be saved to remind users. The default setting is "No".
If set to "Yes", call waiting tone will be disabled when there is a new call during active
call. The default setting is "No".
It is used to set if the device will play the DND reminder ringtone for the incoming call
if the DND feature is enabled. If it set to "Yes", the device will keep mute instead of
playing a ring splash to indicate an incoming call when DND is enabled.
The default setting is "No".
GVC3210 Administration Guide
Version 1.0.1.21
P a g e | 61