https://arttel.ru/
Reset via Web UI
Go to GVC3210 Web GUIUpgrade and the "Factory Reset" option is on the bottom of the page.
1.
Click the "Reset" button to bring up the prompt box as shown below. Click "OK" to reboot the device,
2.
and restore factory settings.
Reset via Reset Pin Hole
There is a Reset pin hole on the bottom side of GVC3210. To reset the device, use a small pin to hold
against the Reset pin hole for more than 10 seconds to restore to factory settings.
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
Figure 20: Web UI - Factory Reset
Figure 21: Web UI - Factory Reset Confirmation
GVC3210 Administration Guide
Version 1.0.1.21
P a g e
|
93