Date & Time; Power Manager - Grandstream Networks GVC3210 Administration Manual

https://arttel.ru/
Date & Time

Assign NTP Server Address 1
Assign the URL or IP address of NTP server 1. The device will obtain date and time from the server to
synchronize date and time with NTP server.

Assign NTP Server Address 2
Assign the URL or IP address of NTP server 2. When the configured NTP server address 1 doesn't
work, the device will obtain date and time from this server to synchronize date and time with NTP server.

Set Date
Manually set the current date for the device, the date configured manually will be erased if the device
is rebooted.

Select Time Zone
Set specific time zone for the device. If DHCP Option 2 is activated for web UI configuration, the device
will skip this setting and directly use the time zone sent by DHCP Option 2.

Set Time
Manually set the current time, the time configured manually will be erased if the device is rebooted.

Use 24-hour Format
Check/uncheck to display the time using 24-hour time format or not. For example, in 24-hour format,
13:00 will be displayed instead of 1:00 pm

Select Date Format
Select the format of year, month and day for the date to be displayed. For example, 12/31/2015,
31/12/2015, 2015/12/31.

Power Manager


Timeout Options:
Choose either to put the GVC3210 in Sleep Mode or to shut it down.
-
-

Timeout Setup
Select the interval before the device enters sleep mode or shutdown. The available intervals are 1
minute, 5 minutes, 10 minutes, 15 minutes, 30 minutes and 60 minutes. The default setting is "Never".
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
Enter Sleep Mode: Once the GVC3210 enters sleep mode, the display monitor will not have
any display and its Web UI is not available. In order to wake up the device from sleep mode,
press the power Key on the remote control
Shutdown: This is the power-off state of the device.
GVC3210 Administration Guide
Version 1.0.1.21
P a g e | 21