Table 8: Schedule; Figure 12: Schedule - Grandstream Networks GVC3210 Administration Manual

https://arttel.ru/
Parameters
Subject
Start Time
End Time
Remind Time
Conference
preset
Repeat
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210

Figure 12: Schedule

Table 8: Schedule

Descriptions
It is used to set the conference name to identify this conference.
It is used to configure the start time of the conference.
It is used to configure the end time of the conference.
It is used to configure whether to remind users in advanced. A prompt dialog box will
pop up on GVC3210 screen 10 minutes before the conference starts.
It is used to select a camera preset when the scheduled conference starts, the
GVC3210's camera will be automatically placed to the preset position. Default is "Not
set".
Users could repeat the scheduled conference, to repeat the conference depending on
the chosen option:

One-time event

Daily

Every Weekday (Mon-Fri)
GVC3210 Administration Guide
Version 1.0.1.21
P a g e | 79