Settings/Peripheral - Grandstream Networks GVC3210 Administration Manual

https://arttel.ru/
Bypass Proxy For
Advanced Settings
Alternate DNS
Server
Secondary DNS
Server
HTTP/HTTPS
User-Agent
SIP User-Agent
IPv6
IPv6 address
Static IPv6
address
IPv6 prefix length
DNS server 1
DNS server 2
Preferred DNS
server

Settings/Peripheral

Parameters
HDMI
HDMI 1 out
resolution
HDMI 2 out
resolution
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
It is used to define the specific URI that the device can directly access to without
HTTP/HTTPS proxy. If it is filled, the device will bypass the proxy to send the packets
to the specific URI. The default setting is keeping this filed blank.
It is used to configure the alternate DNS IP address to failover during the default DNS
server's outage.
It is used to configure the secondary alternate DNS IP address to failover during both
the default DNS server and alternate DNS server's outage.
It is used to configure the User-Agent URI to download phonebook and screensaver
files.
It is used to configure the User-Agent field for SIP messages. If not configured, the
User-Agent in SIP message is Grandstream GVC3210 $version where GVC3210 is
the model name and $version is replaced with the current firmware version.
It allows users to choose whether to get automatically the IPv6 address from DHCP
server (Auto-configured), or configure a static IPv6 address (Statically configured).
Default is Auto-configured.
It is used to configure a static IPv6 address if Statically configured is used.
It is used to set the IPv6 prefix length if Statically configured is used. Default is 64.
It is used to configure the primary DNS IP address if Statically configured is used.
It is used to configure the secondary DNS IP address if Statically configured is used.
It is used to configure the preferred DNS server.
Descriptions
Configures the output image resolution of HDMI 1. Greater resolution value means
higher image definition. Please select the same resolution as the output display
device. The device will automatically read the resolution supported by the output
display device and compare it with the resolution supported by itself. Only the
resolution supported by both will be used. The device will automatically obtain the
optimal resolution when it boots up for the first time.
Configures the output image resolution of HDMI 2. Greater resolution value means
higher image definition. Please select the same resolution as the output display
device. The device will automatically read the resolution supported by the output
display device and compare it with the resolution supported by itself. Only the
GVC3210 Administration Guide
Version 1.0.1.21
P a g e | 60