Settings/H.323/General - Grandstream Networks GVC3210 Administration Manual

Video conferencing endpoint for android
Hide thumbs Also See for GVC3210:
Table of Contents

Advertisement

https://arttel.ru/
Upload Local
MOH Audio File
Enable Local
MOH

Settings/H.323/General

Parameters
Account Active
Enable GK
Enable H.460
GK Discover
Mode
Site Number
GK
Authentication
Username
GK
Authentication
Password
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
It is used to load the MOH (Music on Hold) file to the device. Click on "Browse" button
to upload the music file from local PC. The MOH audio file has to be in .wav or .mp3
format.
Note:
Please be patient while the audio file is being uploaded. It could take more than 3
minutes to finish the uploading especially the file size is large. The button will show as
"Processing" during the uploading. Once done, it will show as "Browse" again. Click
on "Save" on the bottom of the web page and "Apply" on the top of the web page to
save the change.
If set to "Yes", the local MOH will be enabled. Users need to upload local MOH audio
file. Once enabled, users could play the file when holding the call. Default is "No".
Descriptions
This field indicates whether the H.323 account is active. The default setting is "No".
This defines whether to enable GK. If enabled, the device will register to GK
automatically. The default setting is "No".
It is used to define whether to enable H.460.18/19 to support H.323 account, in order
to make the IP calls through public Internet without intermediate nodes. To use this
feature, set "Use NAT IP" to the public IP for GVC3210 under GVC3210 web
UISettingsGeneral Settings.
This configures GK discover mode to be "Auto" or "Manual".
If set to "Auto", the device will discover GK automatically and register to GK.
If set to "Manual", please configure "GK Address" and "Site Number". The device
will discover GK via GK address and register to GK.
The default setting is "Auto".
It is used to configure H.323 conference ID of the GVC3210. The GVC3210 can be
reached by calling the site number. The site number is numeral only.
Enter the username for GK authentication.
Enter the password for GK authentication.
GVC3210 Administration Guide
Version 1.0.1.21
P a g e
|
55

Advertisement

Table of Contents
loading

Table of Contents