Audio; Volume; Ringtone; Audio Priority - Grandstream Networks GVC3210 Administration Manual

https://arttel.ru/

Layer 3 QoS for SIP
Manually configure the Layer 3 QoS parameter for SIP packets. This value is used for IP Precedence,
Diff-Serv or MPLS. The default setting is 26.

Layer 3 QoS for Audio
Manually configure the Layer 3 QoS parameter for audio packets. This value is used for IP Precedence,
Diff-Serv or MPLS. The default setting is 46.

Layer 3 QoS for Video
Manually configure the Layer 3 QoS parameter for video packets. This value is used for IP Precedence,
Diff-Serv or MPLS. The default setting is 34.
VLAN

Layer 2 QoS 802.1Q/VLAN Tag
Assign the VLAN Tag of the Layer 2 QoS packets for LAN port. The default value is 0. Please do not
change VLAN settings before understanding the network VLAN settings or consulting your network
administrator. Otherwise, the device might not get the correct IP address.

Layer 2 QoS 802.1p Priority Value
Assign the priority value of the Layer2 QoS packets for LAN port. The default value is 0.

Audio

Volume


Ringtone Volume
Users can slide left or right to adjust ringtone volume from level 0 to level 7. The default setting is 5.

Media Volume
Users can slide left or right to adjust media volume from level 0 to level 15. The default setting is 11.

Ringtone


Device Ringtone
Select device ringtone from the dropdown list.

Notifications Ringtone
Select device notifications ringtone from the dropdown list.

Audio Priority


Audio Priority
Select priority for connected audio device to GVC3210 as the input/output for voice during call or media.
 If "Auto" is selected, the GVC3210 will automatically detect if it's connected to USB, Bluetooth or
HDMI. If two or three of the above devices are connected to GVC3210, the priority of the audio
input and output is Bluetooth, USB and HDMI from highest to lowest. The default setting is "Auto".
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
GVC3210 Administration Guide
Version 1.0.1.21
P a g e | 30