Settings/Security Settings - Grandstream Networks GVC3200 Administration Manual

Settings/Security Settings

Parameters Descriptions
Web/SSH Access
It is used to set if the device will block the SSH port. If it is set to "Yes", the device will
Disable SSH
block any SSH access to it. The default setting is "No".
It is used to set which protocol will be used to access the device's Web GUI. It can be
Access Method
selected from HTTP and HTTPS. The default setting is HTTP.
It is used to set which port will be used to access the device's Web GUI. By default, if
Port
HTTP is selected, the port number will be 80; if HTTPS is selected, the port number
will be 443.
It is used to set the administrator password for Web GUI. It is case sensitive with a
Admin Password
maximum length of 32 characters. The default password is "admin".
It is used to set the user password for Web GUI. It is case sensitive with a maximum
User Password
length of 32 characters. The default password is "123".
Screen lock
Delete screen Allows the administrator to clear the screen lock password without submitting the old
lock password one if it was configured.
Screen lock Allows the administrator to set a password for screen lock. The field supports 6-digit
password number.
Confirm screen
It is used to enter the new screen lock password again to confirm.
lock password
SIP
Defines the SSL certificate used for SIP over TLS to access particular websites. The
device supports SIP over TLS encryption, realizing it via the built-in private key and
SIP TLS
Certificate SSL certificate. The SSL certificate the user specifies for TLS encryption should be
X.509 format.
SIP TLS Private Defines the SSL private key used for SIP over TLS. The SSL private key the user
Key specified for TLS encryption should be X.509 format.
SIP TLS Private
Defines the SSL private key password used for SIP over TLS.
Key Password
GVC3200/3202 Administration Guide
P a g e | 61