Grandstream Networks GVC3210 Administration Manual page 51

https://arttel.ru/
Use # as Dial Key
Conference-URI
Upload Local
MOH Audio File
Enable Local
MOH
Account Ring
Tone
Call Forwarding
Mode
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
It is used to set the device whether to use the "#" key as the "Send" key. If set to "Yes",
if the end user taps the "#" key on the remote control, the device will send out the
typed digits. If set to "No", the "#" key is included as part of the dialing string and
please make sure the dial plan is properly configured to allow dialing # out. The default
setting is "Yes".
It is used to configure the network based conference URI (Broadsoft Standard). If it is
configured, end user needs to select MORE on the bottom menu in call interface and
click on "N-way Conf" during the conference to transfer the host to the remote media
server.
It is used to load the MOH (Music on Hold) file to the device. Click on "Browse" button
to upload the music file from local PC. The MOH audio file has to be in .wav or .mp3
format.
Note:
Please be patient while the audio file is being uploaded. It could take more than 3
minutes to finish the uploading especially the file size is large. The button will show as
"Processing" during the uploading. Once done, it will show as "Browse" again. Click
on "Save" on the bottom of the web page and "Apply" on the top of the web page to
save the change.
If set to "Yes", the local MOH will be enabled. Users need to upload local MOH audio
file. Once enabled, users could play the file when holding the call. Default setting is
No.
It is used to configure the ringtone for the account. Users can set ringtones from the
dropdown list. User can also import customized ringtone from Setting menu. The
customized ringtone file name will also be showed up in the dropdown list that allows
user to select.
It is used to set the Call Forwarding feature for this account.

None:
Setting the feature to "None" will disable Call Forward.

Unconditional:
If set to "Unconditional", it will forward all calls to a particular number

Time based:
With "Time Based" forward, set a time range for the calls to be forwarded:
Period:
-
Configures the period of time to forward the call when "Time based" Call
Forward type is used. The time is 24-hours format HH:mm, 10:00 for example.
In time forward to:
-
When "Time based" Call Forward Type is used, specifies the number to be
forwarded to within the configured Time Period above.
GVC3210 Administration Guide
Version 1.0.1.21
P a g e | 51