https://arttel.ru/
Peripheral
HDMI Settings
HDMI 1 Out Resolution
Set HDMI 1 out resolution. Up to 4K resolution, default is 1080p (depending on TV resolution).
HDMI 1 Screen trimming
The user can configure screen percent from 0% to 100%. This adjusts the image size displayed on the
monitor. Use this option when output device (for example, LCD monitor or TV) is unable to display the
GVC3210 screen completely.
HDMI 2 Out Resolution
Set HDMI 2 out resolution. The resolution is up to 1080p.
HDMI 2 Screen trimming
The user can configure screen percent from 0% to 100%. This adjusts the image size displayed on
the monitor. Use this option when output device (for example, LCD monitor or TV) is unable to display
the GVC3210 screen completely.
Note: When the GVC3210 is using 4K resolution, HDMI Out Port 2 is not supported. Users can only
use HDMI Out Port 1 for one display.
Camera
Move Speed
Set the camera movement speed when the camera is being adjusted. From slow to fast it can be set
to level 1 to level 16. Slow speed helps positioning precisely, while fast speed helps positioning quickly.
Initial Position
Set the initial position of the camera when GVC3210 boots up.
If set to "default", the camera will automatically rotate to the initial position, which means moving to
the center.
If set to "Position when power off", the camera will rotate to the last position before reboot.
If set to "Custom", the camera will rotate back to preset N when the device boots up.
Status
The Status page lists GVC3210's account status, peripheral status, network status, system info status,
remote control status.
Account
Account
Account name.
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
GVC3210 Administration Guide
Version 1.0.1.21
P a g e
|
32