Settings; Settings/Sip/General - Grandstream Networks GVC3210 Administration Manual

https://arttel.ru/

Settings

The Settings page lists Account, Network Settings, Peripheral, Call Features, General Settings and Security
settings.
The GVC3210 supports following accounts:

One SIP account that the user can register to any SIP platform.

One H.323 account that the user can register to any H.323 platform.

IPVideoTalk account that is supported by Grandstream's IPVideoTalk service.

BlueJeans account.
The following table shows all the settings that SIP and H.323 accounts has. Please note the IPVideoTalk
account and BlueJeans account have a subset of the settings that the SIP account has.

Settings/SIP/General

Parameters
Account Active
Account Name
SIP Server
Secondary SIP
Server
Tertiary SIP
Server
SIP User ID
SIP
Authentication ID
SIP
Authentication
Password
Voice Mail
Access Number
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
Descriptions
This field indicates whether the account is active. If disabled, the device will not send
registration information to SIP server. The default setting is enabled.
It is used to configure the name associated with each account to be displayed on the
upper left corner of the TV.
It is used to configure the URL or IP address and port of the SIP server. This should
be provided by VoIP service providers (ITSP).
It is used to configure the URL or IP address, and port of the secondary SIP server.
When the connection request sent to SIP server fails, the device will try to use the
secondary SIP server.
It is used to configure the URL or IP address and port of the tertiary SIP server. When
the connection request sent to SIP server and secondary SIP server fails, the device
will try to use the tertiary SIP server.
It is used to configure the user account information, provided by your VoIP service
provider (ITSP). It is usually in the form of digits similar to phone number or actually a
phone number.
It is used to configure the SIP service subscriber's Authenticate ID used for
authentication. It can be identical to or different from the SIP User ID.
It is used to configure the account password required for the device to authenticate
with the ITSP (SIP) server before the account can be registered. After saving, it will
appear as hidden for security purpose.
This parameter allows you to access voice messages by entering voice mail or dialing
access number. On the device, the users can select menuApplicationsVoicemail
and click on the account to dial out to voicemail portal.
GVC3210 Administration Guide
Version 1.0.1.21
P a g e | 38