Maintenance/Reboot - Grandstream Networks GVC3210 Administration Manual

https://arttel.ru/
Send SIP Log
Syslog Keyword
Filter
H.323 Syslog
Level
Ping
Target Host
Traceroute
Target Host
Developer Mode
Developer Mode

Maintenance/Reboot

Users could click on "Reboot" to reboot the device, click on "Sleep" to go into sleep mode or click on
"Shutdown" to turn off the device.
https://arttel.ru/shop/terminaly-vks/grandstream-gvc3210
If set to "Yes", the device will send SIP log in the syslog messages. The default setting
is "No".
After entering the keywords, you will filter the system log with keywords, and multiple
keywords should be separated by commas.
For example, set the filter keyword "SIP" to filter SIP log. set the filter keyword
"Http,SIP" to filter Http and SIP log.
Select H.323 syslog level in the dropdown menu. The default setting is "Off", which
means no H.323 related syslog information in syslog. The users can select syslog
level from 1 to 10, with 10 being the highest level.
Enter the target host and press "Start" to ping the host address. This can be used to
test the reachability of a host in the network and measure the round-trip time for
messages sent from the device to the destination host.
Fill in target host or IP address and click START to view details displayed below. This
will output a list of traversed routers and measure transit delays of packets across the
network.
If turned on, ADB (Android Debug Bridge) function will be enabled on the device. The
default setting is "Disabled". This option is usually used for development purpose
instead of normal usage.
GVC3210 Administration Guide
Version 1.0.1.21
P a g e | 73