Settings/Peripheral; Settings/Call Features - Grandstream Networks GVC3200 Administration Manual

DNS server 2
It is used to configure the secondary DNS IP address if the static IP is used.
Preferred DNS
It is used to configure the preferred DNS server.
server

Settings/Peripheral

Peripheral section on Web page is the same on local LCD. Please refer to section Peripheral in chapter
GVC3200/GVC3202 LCD

Settings/Call Features

Parameters Descriptions
It is used to set if the device will enable the video feature automatically when it makes
Start Video
an outbound call. If set to "Yes", the video codec attributes will be included in the SIP
Automatically
INVITE message. Or the attributes will not be included. The default setting is "Yes".
Always Ring
If set to "Yes", the device will always ring internal speaker. The default setting is "No".
Internal Ringer
Defines whether to disable dial plan in dial screen, contacts, incoming call and
Disable DialPlan
outgoing calls and MPK. The default setting is "No".
Configures the characters for filter when dialing out numbers. Multiple characters are
allowed. For example, if set to [()-], when dialing (0571)-8800-8888, the characters ()-
Filter Characters
will be automatically filters and number 057188008888 will be dialed directly. The
default setting is [()-].
It is used disable call waiting feature. If it is checked, the device will reject the second
Disable Call-
incoming call during an active session without user's knowledge. But this missed call
Waiting
record will be saved to remind users. The default setting is "No".
Disable Call- If set to "Yes", call waiting tone will be disabled when there is a new call during active
Waiting Tone call. The default setting is "No".
It is used to set if the device will play the DND reminder ringtone for the incoming call
Disable DND if the DND feature is enabled. If it set to "Yes", the device will keep mute instead of
playing a ring splash to indicate an incoming call when DND is enabled. The default
Reminder Ring
setting is "No".
It is used to set if the device allows the end users to make an outbound IP call. If it is
Disable Direct IP
set to "Yes", the device will hide the IP call feature and end users will not be allowed
Call
to make an outbound IP call. The default setting is "No".
SETTINGS.
GVC3200/3202 Administration Guide
P a g e | 57